NCVT MIS Portal

NCVT MIS Portal – About us, Login Portal

About NCVT

NCVT is known as National Vocational Training. It was established by the Government of India in 1956. The organization is much entrusted and takes responsibilities of advising standards and curricula for craftsmen training, advising the Government of India on the overall policy and programs, conducting All India Trade Tests and awarding National Trade Certificates.

The NCVT Portal is an important portal to provide a whole source of information about all Institutes and courses under the guidelines of NCVT (National Council of Vocational). Candidates are able to read here to read all information about NCVT ITI, Trainee and Internship programme and annual and semester exam of state ITI’s.

NCVT MIS Apprenticeship

The MIS Apprenticeship organize by National Vocational Training. The Full form of MIS is Management Information System. The NCVT MIS is an administrative information system made for storing computerized databases of all details of student-like enrollments for both engineering and non-engineering skill development programs which is offered by the various institutes (ITI).

All institutes of ITI’s follow the rules and guidelines of NCVT. The ITI’s follow policies and supervision of India’s Ministry of Skill Development and Entrepreneurship, Directorate General of Training (DGT). The NCVT exam of NCVT is held on a semester basis. This is a four semester program. The Candidates can get brief details of ncvtmis.gov.in website.

Trade of NCVT ITI

The ncvt holds various IIT program for students. Candidates check given below different NCVT ITI trades.

  • Diesel Mechanic
  • Electrician
  • Fitter
  • Machinist
  • Turner
  • Information Technology
  • Stenographer
  • Automobile
  • Wireman
  • Tool and Die Maker
  • Motor Mechanic
  • Draughtsman Civil
  • Draughtsman Mechanical

Eligibility Criteria for NCVT MIS Portal

The candidate who wishes to apply for MIS program should fulfill the eligibility requirement released by the conducting body. The candidates who have passed 10th/ 12th, ITI/ Diploma, B.Tech/ B.E/ B.Sc, M.Sc, M.Tech/ ME are eligible for MIS program.

For Technical Courses

  • Site Engineer Control Panel Training
  • Maintenance Technician (Electrical)
  • Wireman Control Panel
  • Access Control Installation
  • CCTV Installation

Building Automation

  • NIBA -Building Automation Course
  • Fire Detection & Alarm Systems
  • Electronic Physical Security (Access Control System)
  • CCTV Surveillance systems
  • GAS Suppression System
  • Public Address System

Network & Hardware

  • Computer Basic Hardware and Maintenance
  • Server introduction
  • CCNA
  • Network Essentials
  • Windows Server 2008 to 2012
  • Exchange Server 2010
  • Storage
  • English & Personality Development

CADD (Mechanical) Courses

  • CREO Parametric
  • Solid Works
  • CATIA
  • NX CAM
  • NX NASTRAN
  • ANSYS
  • Hypermesh

PPM Course

Primavera

CADD (Architectural/ Civil) Courses

  • AutoCAD
  • Revit Architecture
  • PERL Language
  • STAAD PRO
  • AutoCAD Civil 3D
  • Max for Engineers/Architects
  • Pro Steel

Network & Hardware

  • Server introduction
  • CCNA
  • Network Essentials
  • Windows Server 2008 to 2012
  • Exchange Server 2010
  • Storage
  • English & Personality Development

Automation Courses

  • NCAP – Industrial Automation Professional
  • PGDIA – Post Graduation Diploma in Automation
  • NACAPE – Certified Automation Electrical Systems Professional
  • ITI Electricians
  • NPSP – PLC & SCADA Professional
  • NAD – Electric Drives& Motors Professional
  • NIP – Process Instrumentation Professional
  • NHP – HMI / MMI Professional
  • NPDP – Panel Designing & Auto Cad Professional
  • NDD – DCS Developer
  • NAIN – Advance Industrial Networking
  • Summer/ Winter/Industrial training (Live Project)
  • Customized training
  • Portfolio Development, Soft Skill Development & Interview Preparation

Embedded

  • NESP_ Embedded System Professionals
  • STC Module – 1 Micro Controller Family 8051 / AVR / PIC
  • STC Module -2 Advance Embedded C
  • STC Module – 3 RTOS – Real-time Operating System
  • STC Module – 4 Serial Communication Bus
  • STC Module – 5 Robotics Development & Engineering
  • STC Module – 6 Electronics Circuit, Sensors Development & Interfacing
  • STC Module – 7 PIC Micro Controllers
  • STC Module – 8 Linux & Device Driver Programming
  • STC Module – 9 ARM Micro Controllers (Advance Risk machine)
  • STC Module 10 – MATLAB
  • STC Module 11 – NI LAB VIEW

Step to apply for NCVT MIS Apprenticeship

The eligible candidate can apply for a trainee or apprentice program from the official portal of ncvt.mis.gov.in.  For details of NCVT MIS Registration follow the steps given below.

  • Open official website i.e. https://apprenticeship.gov.in/
  • Click on Apprentice
  • Follow the candidates Registration
  • Now, the application form page open is open
  • Fill the application form details like Candidates Types, Date of Birth, Name, Gender, Parents’ name, UID number, spouse name, Category and etc.
  • Now, Upload passport size photo and Date of Birth documents
  • Click on final submit button
  • A confirmation E-mail and SMS will send to given details

Required Document and details for NCVT MIS Portal Training   

Personal Details

  • Date of Birth
  • Parents Details
  • Aadhaar Card Number
  • Category

Contact Details

  • Address
  • Name of State, District and Pin code
  • Contact Number and a valid E-mail Id

Qualification Details

  • Academic Qualification
  • Obtained marks and total marks
  • Total Percentage

Technical Qualification

  • Name of Institute
  • The Name of Council/ University
  • Name of trades/ Courses
  • Courses start and End Dates
  • Maximum Marks
  • Obtained marks
  • Overall percentage

Trade Preference

  • Select 1st Preference
  • Select 2nd Preference
  • And 3rd Preference

Document to be uploaded

  • Upload Your Passport Size Photograph (Upload JPG/JPEG/GIF/PNG up to 200 KB with minimum size of 10 KB and dimensions that are at least 3.5cm x 4.5cm(132 x 170 pixels))
  • Upload Your Signature (Upload JPG/JPEG/GIF/PNG up to 200 KB with minimum size of 10 KB and dimensions that are at least 5.3cm x 2.2cm(200 x 80 pixels)
  • Date of Birth Document (Upload Doc/Docx/PDF/JPG up to 200 KB with minimum size of 10 KB and dimensions that are at least 15cm x 15cm(566 x 566 pixels)

NCVT MIS Portal Time Table 2020

The official authority is releasing the ncvt iti exam time table and aitt. The exam date of AITT (All India Training Test) and ATS (Apprenticeship Training Scheme) is conducted in the month of July and August. Here are the few steps given below to download the exam scheme.

The Exam time table is available online mode. Candidates will follow the few steps given below.

  • Open the official website of NCVT MIS portal ( ncvtmis.gov.in.)
  • Click to following link for “Revised program for AITT under
  • Select Session (July and August)
  • Click on Download
  • Select download format
  • Save pdf and take print a copy

NCVT MIS ITI Admit Card

The candidate who has applied successfully for NCVT MIS trainee/ apprentices could download admit card using a few credentials. Admit card is an important document for each candidate to enter in the examination to appear in examination. Without admit card candidates will not be allowed at the exam center. The hall ticket of ncvt exam will be released online mode at ncvtmis.gov.in for semester and annual exam. Candidates can download admit card by using the following steps given below.

  • Open official website of ncvtmis.gov.in
  • Click on notification page
  • Select session
  • Enter the required details
  • Download the “NCVT Hall Ticket”
  • Take print out

 NCVT MIS Result 2020

The result of ncvt exam is declared by official authority at its official website ncvtmis.gov.in. Candidates can check their NCVT MIS ITI semester and annual exam result form given link. The result is declared after announcing the practical marks.

How to check NCVT MIS Result

  • Open official website (ncvtmis.gov.in)
  • Follow and click on Verification button
  • Select and Click on Marksheet verification
  • Fill details like – Roll number/ registration number
  • Select Exam System (annual/ semester)
  • Select Semester
  • Then click search button
  • Marksheet window will open
  • Download marksheet
  • Printout Marksheet
Share the love